Ikhaya> Ibhuloge> aluminum parts

aluminum parts

August 25, 2020

 Alkali corrosion of aluminum parts is very different from that of steel parts. The first is that aluminum itself is not resistant to alkali. For this reason, it is necessary to perform degreasing in a solution of a weakly basic salt or in an organic solution before alkali etching. After the oil on the surface of the workpiece is basically removed, it is carried out in a strong alkali. Flash, otherwise the surface of aluminum will be over-etched.

The alkali etching of aluminum parts is mainly to remove the oxide film on the surface of the article. At the same time when the oxide film is removed, the oil contamination is also brought together, but the alkali etching time needs to be completed within several seconds to several tens of seconds. The degreasing of the steel parts is the direct effect of the degreasing solution on the surface of the steel parts, but it does not react with the oxide layer on the surface of the steel parts, ie, the degreasing solution does not corrode the steel parts and can be soaked in the lye Always check.

Xhumana nathi

Author:

Ms. Wendy

Phone/WhatsApp:

+8613777124360

Imikhiqizo Evelele
I-Industry News
You may also like
Related Categories

Imeyili kulo mthengisi

Isihloko:
I-imeyili:
Umlayezo:

Your message must be betwwen 20-8000 characters

Othintana naye

Thumela ukuPhenya

Uhlu Lwemikhiqizo Ehlobene

Silandele

Copyright © 2024 Ningbo City Yinzhou Ruican Machinery Co.,Ltd Wonke amalungelo agodliwe.
Sizokuthinta ngokushesha

Gcwalisa eminye imininingwane ukuze ukwazi ukuxhumana nawe ngokushesha

Isitatimende Sobumfihlo: Ubumfihlo bakho bubaluleke kakhulu kithina. Inkampani yethu ithembisa ukungadaluli imininingwane yakho kunoma yikuphi ukuveza izimvume zakho ezicacile.

Thumela